Test Instrument Shop
  • About Us
  • Store
  • Brands
    • AEMC
    • Flir
    • Fluke
    • Instek
    • Rigol
    • UNI-T
  • Payment Methods
  • Contact

Fluke 434-II Three-Phase Energy Analyzer

$1,640.00
Add to Cart
Features
Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up.
Automatic Transient Mode: 435 and 437 Series II analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV.
Fully Class-A compliant: 435 and 437 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard.
Mains signaling: 435 and 437 Series II analyzers measure interference from ripple control signals at specific frequencies.
400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems.
Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic Trending: Every measurement is always automatically recorded, without any set-up.
System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: With included analysis software.
Battery life: Seven hours operating time per charge on Li-ion battery pack.

Include:
BC430 Power Adapter
International plug adapter set
BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)
TL430 Test lead and Alligator clip set
WC100 color coding clips and regional decals
i430flex-TF, 24 inch (61cm) length, 4 clamps
8 GB SD card
PowerLog on CD (includes operator manuals in PDF format)
USB cable A-Bmini
C1740 Soft Case

Fluke 437-II 400 Hz Three-Phase Power Quality and Energy Analyzer

$2,590.00
Add to Cart
Features
Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up.
Automatic Transient Mode: 435 and 437 Series II analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV.
Fully Class-A compliant: 435 and 437 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard.
Mains signaling: 435 and 437 Series II analyzers measure interference from ripple control signals at specific frequencies.
400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems.
Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic Trending: Every measurement is always automatically recorded, without any set-up.
System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: With included analysis software.
Battery life: Seven hours operating time per charge on Li-ion battery pack.


Include:
C437 Hard Case with rollers
BC430 Power Adapter
International plug adapter set
BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)
TL430 Test lead and Alligator clip set
WC100 color coding clips and regional decals
i430flex-TF, 24 inch (61cm) length, 4 clamps
8 GB SD card
PowerLog on CD (includes operator manuals in PDF format)
USB cable A-Bmini

Fluke N4K 3PP42B Norma 4000 High Precision Power Analyzer

$3,390.00
Add to Cart
Features
Three phase with 3xPP42 power phase input modules with current binding post
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Compact design makes it easy to carry and saves working space.
Simple user interface ensures easy, intuitive operation.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
Fluke NormaView PC software for data download, analysis & report writing.
All inputs are galvanically isolated to avoid short circuits in all applications.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.

Include:
Power supply cable
5.7“ / 144 mm color display
5 test leads and clips
Space for three power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke 1750/NT Power Recorder

$3,460.00
Add to Cart
Features
Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connectio
Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance
Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections
Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.
Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle.
Quick and reliable configuration: PDA wireless “front panel interface provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software – no need to worry about missed information due to incorrect setups
Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time
5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct
Measure every parameter: Voltage and current on three phases, neutral, and ground

Include:
SD memory card
Fluke Power View and Fluke Power Analyze software
Power cord with international plug set
Ethernet cable
Color localization set
Printed Getting Started manual
CS 1750/1760 Rugged transit softcase
1750 acquisition unit
ARCHOS 43 Internet Tablet
5 Test leads and clips
Product CD with software and user manual PDF
DOES NOT INCLUDE CURRENT PROBES

Fluke 1750-TF Power Quality Analyzer

$3,760.00
Add to Cart
Features
Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.
Quick and reliable configuration: PDA wireless “front panel interface provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations
Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software – no need to worry about missed information due to incorrect setups
Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time
Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance
Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle.  
Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections
No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct
Measure every parameter: Voltage and current on three phases, neutral, and ground
5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events
Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection

Include:
1750 acquisition unit
PDA wireless “front panel interface” and charger power plug adapters
(4) 3210-PR-TF-II 1000A, 61CM (24IN) Flex CTs
(5) Test leads and clips
SD memory card
Fluke Power View and Fluke Power Analyze software
Power cord with international plug set
Ethernet cable
Color localization set
Printed Getting Started manual
Product CD with software and user manual PDF
CS 1750/1760 Rugged transit softcase

Fluke 1760 Basic Three Phase Power Quality Recorder Topas

$4,090.00
Add to Cart
Features
GPS time synchronization: Correlate data with events or datasets from other instruments with precision
10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
Uninterrupted power supply (40 minutes): Never miss important events - even record the beginning and end of interruptions and outages to help determine the cause
Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions
2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries

Include:
Internal Flash-memory 2 GB
PQ Analyze software on CD-ROM
Ethernet cable for network connection (1)
Crosslink Ethernet cable for direct PC connection (1)
Mains cable (1)
Operational manuals
Carrying bag

Fluke N5K 3PP54R Norma 5000 High Precision Power Analyzer

$4,190.00
Add to Cart
Features
Three phase with 3xPP54 power phase input modules and printer
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N4K 3PP50I Norma 4000 High Precision Power Analyzer

$4,875.00
Add to Cart
Features
Three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
Fluke NormaView PC software for data download, analysis & report writing.
Compact design makes it easy to carry and saves working space.
Simple user interface ensures easy, intuitive operation.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
All inputs are galvanically isolated to avoid short circuits in all applications.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.


Include:
Power supply cable
5.7“ / 144 mm color display
5 test leads and clips
Space for three power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N4K 3PP42IPB Norma 4000 High Precision Power Analyzer

$4,960.00
Add to Cart
Features
Three phase with 3xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface and analog / digital output channels
Compact design makes it easy to carry and saves working space.
Simple user interface ensures easy, intuitive operation.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
All inputs are galvanically isolated to avoid short circuits in all applications.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.341kHz or 1 MHz sample rates for detailed signal analysis.
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
5 test leads and clips
Space for three power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values


Fluke N5K 3PP64 Norma 5000 High Precision Power Analyzer

$5,090.00
Add to Cart
Features
Three phase with 3xPP64 power phase input modules
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values


Fluke N5K 6PP54IR Norma 5000 High Precision Power Analyzer

$6,230.00
Add to Cart
Features
Three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and printer
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke 1745 Power Quality Logger Memobox

$2,490.00
Add to Cart
Features
Installs inside the cabinet: Compact, fully-insulated housing and accessories fit easily in tight spaces next to live power
Plug and play: Setup in minutes with automatic current probe detection and powering
Measure voltage with premium accuracy: IEC61000-4-30 Class-A compliant voltage accuracy (0.1%)
Determines the root cause: Included PQ Log software quickly analyzes trends, creates statistical summaries, and generates detailed graphs and tables
Monitors power for the long-term: Data can be downloaded during recording without interruption
Rugged and reliable: Designed for everyday field use with no moving parts and durable insulated case with two year warranty
Quickly validate quality of power: Assess power quality according to EN50160 power quality standard with statistical overview
Include :
4 Flexible probes 15/150/1500/3000 A with 2 m cable
CD-ROM with PQ Log software
Test leads for voltages and power supply
Printed English manual
Color localization kit
RS232 interface cable and RS232-USB adapter
4 black dolphin clips
Carrying bag
Test certificate with measurement values
Multi-language manual CD


Fluke 726 Multifunction Precision Process Calibrator

$1,050.00
Add to Cart
Features
More precise measurement and calibration source performance, accuracies of 0.01%.
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Transmitter error% calculation, interpret calibration results without a calculator
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement
New voltage input protection design for improved reliability
Three-year warranty

Include:
One set of AC72 alligator clips
One set of stackable test leads
One set of TL75 test leads
4 AA Batteries (installed)
725/726 CD-ROM (contains Users Manual; not shown in Figure 1)
NIST- traceable calibration report and data

Fluke 725/P27EX Intrinsically Safe Multi-function Process Calibrator

$1,290.00
Add to Cart
Features
Use the measure and source functions to test and calibrate almost any process parameter. The Fluke 725Ex Intrinsically Safe Calibrator is a powerful, multi-function

calibration solution that offers:
ATEX II 1 G Ex ia IIB 171°C KEMA 04ATEX 1303X
I.S. Class I, Division 1 Groups B-D, 171°C compliance
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Store frequently-used test setups for later use
Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
Pressure switch test function to capture set, reset and deadband values
Compact size and weight
Simple, push-button user interface
Rugged and reliable, for field use
The optional 700PEx Pressure Modules are ATEX-certified Ex II 1 G Ex ia IIC T4. They are also certified by CSA I.S Class 1, Division 1 areas Group A-D per NEC-500.

Include:
One set of AC72 alligator clips
One set of stackable test leads
One set of TL 75 test leads
User manuals
300 PSI Pressure Module

Fluke 753 Documenting Process Calibrator

$1,490.00
Add to Cart
Features
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Power transmitters during test using loop supply with simultaneous mA measurement
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
Holds up to a full week of downloaded procedures and calibration results.
Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable

measurement delay etc.
Easy to use
Three year warranty
Bright white dual display. Read both sourced and measured parameters simultaneously.
Multi lingual interface
Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
Delivered with DPC/Track Sample software
Compatible with many Asset Management software packages.

Include:
BC7240 battery charger
Li-on BP7240 battery pack
DPCTrack 2 Sample Software
Instruction manual
NIST-traceable calibration report and data
Three sets of TP220 test probes with three sets of “extended tooth alligator clips
Two sets AC280 hook clips
C799 Soft Field Case
USB communication cable

Fluke 7526A-156 Multifunction Calibrators

$1,620.00
Add to Cart
Features:
Sources and measures dc voltage, current, resistance, RTDs and thermocouples
Precision pressure measurement using Fluke 700 series pressure modules
Includes 24 V dc transmitter loop power supply
Measures 4-20 mA loop current
Includes automated switch-test function
Accepts ITS-90 coefficients for accurate SPRT measurements
Compatible with MET/CAL® Calibration Software

Fluke 754 Documenting Process Calibrator-HART

$1,650.00
Add to Cart
Include:
BC7240 battery charger
Li-on BP7240 battery pack
DPCTrack 2 Sample Software
Instruction manual
NIST-traceable calibration report and data
Three sets of TP220 test probes with three sets of “extended tooth alligator clips
Two sets AC280 hook clips
C799 Soft Field Case
USB communication cable
754 HCC Hart Communication Cable
NIST calibration certificate

Fluke 754/750SW BU Fluke 754 DPC AND 750SW DPCTRACK2 Bundle Package

$1,790.00
Add to Cart
Include:
BC7240 battery charger
Li-on BP7240 battery pack
DPCTrack 2 Sample Software
Instruction manual
NIST-traceable calibration report and data
Three sets of TP220 test probes with three sets of “extended tooth alligator clips
Two sets AC280 hook clips
C799 Soft Field Case
USB communication cable
754 HCC Hart Communication Cable
750SW  DPC/TRACK2 Software
NIST calibration certificate

Fluke IP-200-US US Window Installation Kit

$1,090.00
Add to Cart
Features
2 Inches (50 Millimeter) & 3 Inches (75 Millimeter) US Window Installation Kit
Engineered and tested to withstand electric-arcs up to 50kA for a huge 30 cycles
Certified by UL & CSA for Type 3/12 (Outdoor) environments in North America and Canada, the C-Range windows are tested to withstand the long term aging effects of UV

exposure.
Certified by SIRA Certification IP65 (Outdoor) environments in Europe.
The CLIRVU coating – exclusive to Hawk IR Windows - seals  the optic prior to assembly to protect against moisture degradation.
The Quadraband optic is IR-Fusion compatible allowing the thermographer to see potential problems both ways.
Each C-Range window is delivered with an identification plate attached for unique, on-site numbering for rapid location confirmation and faster repairs.

Include:
Installation CD
Self-adhesive Drilling Template
Security Access Key
Warranty Statement

Fluke Ti110 Industrial-Commercial Thermal Imager 30hz

$1,240.00
Add to Cart
Include:
AC power adapter
Lithium ion smart battery
USB cable
SD memory card
Hard Carrying Case
Soft Transport Bag
Adjustable hand strap (left- or right-handed use),
Printed users manual in English, Spanish, French, German and Simplified Chinese
All other manuals on CD—total of 18
SmartView software
Warranty Registration card


FlukeTIS55 30HZ Industrial Commercial Thermal Imager

$1,340.00
Add to Cart
Include:
Thermal imagers are shipped with a universal AC power adapter
Lithium ion smart battery (TiS65/60 includes 2 each—other models 1 each)
USB cable
Micro SD card (TiS65/60, TiS55, TiS45)
Hard carrying case (TiS65/60, TiS55/50, TiS45/40)
Soft transport bag
Adjustable hand strap (TiS65/60, TiS55/50, TiS45/40)
Quick Reference Guide and Safety Sheet
TiS65/60 models includes a two-bay battery charger

Fluke Ti125/IND Industrial-Commercial Thermal Imager and Industrial System

$1,540.00
Add to Cart
Include:
Fluke Ti125 Industrial-Commercial Thermal Imager
AC power adapter
Lithium ion smart battery
(Ti125 includes 2 each—other models 1 each)
        USB cable
        SD memory card
        Hard Carrying Case
        Soft Transport Bag
        Adjustable hand strap (left- or right-handed use)
Printed users manual in English, Spanish, French, German and Simplified Chinese
All other manuals on CD—total of 18
SmartView software
Warranty Registration card
Ti125 model also include a two-bay charging base
Multi-format USB memory card reader

Fluke Ti200 Thermal Imager

$1,650.00
Add to Cart
Features
LaserSharp® Auto Focus for consistently in-focus images. Every. Single. Time.
See the crucial details needed to help clearly identify potential problems with precisely blended visual and infrared images – only with IR Fusion® technology with

AutoBlend™ mode.
A superior level of detail with best in class spatial resolution and field of view provide more accurate measurements from further distances
Capture up to five additional measurements with CNX™  Wireless System for more complete analysis and reporting
Included SmartView Mobile App Analysis and Reporting Software - faster communication with wireless image transfer directly to your PC, Apple ® iPhone ® or iPad ®

directly from the jobsite.
One-handed, easy-to-use user interface
Ruggedized high resolution 640x480 capacitive touch screen for quick menu navigation
Capture additional digital images to show location or additional site details with IR-PhotoNotes ™ Annotation System
Standard and radiometric video recording
Streaming video (USB and HDMI)
Text and voice recording and annotation gets additional details saved with the image file
Optional interchangeable lenses for greater flexibility in additional applications

Include:
Thermal imager with standard infrared lens;
Ac power supply and battery pack charger (including mains adapters); two, rugged lithium ion smart battery packs
Micro SD memory card with SD adapter
USB cable
HDMI video cable
SmartView ®  software via download
Rugged, hard carrying case
Soft transport bag
Adjustable hand strap
Warranty registration card

Fluke TIS75 Thermal Imager 30 Hz

$1,680.00
Add to Cart
Features
TIS75 Thermal Imager 30 Hz
In-focus quality images with the easy to use manual focus operation
Professional quality images – 320x240 resolution (76,800 pixels)
D:S of 504:1
Temperature measurement range –20 °C to 550 °C (–4 °F to 1022 °F)
Find problems fast with exclusive IR-Fusion® Blending and PIP mode – capture the details you need to analyze problems and clearly identify the location
3.5 inch, 320x240 LCD
5 megapixel industrial performance digital camera
Smart battery system – lithium ion smart battery with five-segment LED charge level display
Email and share images in real time with Fluke Connect®
Stores thousands of images – 4 GB internal memory and 4 GB micro SD card

Include:
TIS75-30Hz Thermal Imager
Universal AC Power Adapter
2 x Lithium Ion Smart Battery
USB Cable
Two Bay Battery Charger
Micro SD Card
Hard Carrying Case
Soft Transport Bag
Adjustable Hand Strap
Quick Reference Guide
Safety Sheet


Fluke TI400/FCA TI400 IR Cam with DMM A3001 FC iFlex Kit

$2,145.00
Add to Cart
Include:
Thermal imager with standard infrared lens
AC power supply and battery pack charger (including mains adapters)
Two, rugged lithium ion smart battery packs
Micro SD memory card with SD adapter
3m USB cable
3m HDMI video cable
SmartView® software with free software upgrades for life
Rugged, hard carrying case
Soft transport bag
Adjustable hand strap
Printed user's manual (five languages)
CD user's manual
Warranty registration card

Fluke TI450 Tele Kit Building and Industrial Thermal Imager

$2,390.00
Add to Cart
Features
TI450 60Hz Thermal Imager, 320x240, 60 HZ
SuperResolution mode: 640 x 480
LaserSharp® Auto Focus
Fluke MultiSharp™ Focus
IR Fusion® technology with AutoBlend™ mode.
Faster communication with wireless image transfer directly to your PC, Apple® iPhone® or iPad®
One-handed, easy-to-use user interface
Ruggedized  Touchscreen Display (3.5in) diagonal
IR-PhotoNotes™ Annotation System
Standard and radiometric video recording
Streaming video (USB and HDMI)
Text and voice recording and annotation
Included SmartView®  and SmartView Mobile App Analysis and Reporting Software

Include:
Infrared camera with standard infrared lens
FREE Fluke LENS/TELE2
AC power supply
Battery pack charger (including universal AC adapters)
Two rugged lithium ion smart battery packs
USB cable
HDMI video cable
4 GB micro SD card
Rugged hard carrying case
Soft transport bag
Adjustable hand strap

Fluke TiX560/T2 60HZ Thermal Imager

$4,090.00
Add to Cart
Include:
Thermal imager with tele2 lens
AC power supply
Battery Pack charger (universal adapter)
Two rugged lithium ion smart battery packs
USB cable
HDMI video cable
Rugged, hard carrying case
Adjustable neck and hand strap
Bluetooth headset (where available)
Warranty registration card
Calibration certificate
Flash drive with product manuals (English, Chinese, German, Portuguese, Spanish, French, Italian, Korean, Japanese, Russian and Turkish) and SmartView® software

Fluke TiX560/W2 60HZ Thermal Imager

$4,960.00
Add to Cart
Include:
Thermal imager with wide2 lens
AC power supply
Battery Pack charger (universal adapter)
Two rugged lithium ion smart battery packs
USB cable
HDMI video cable
Rugged, hard carrying case
Adjustable neck and hand strap
Bluetooth headset (where available)
Warranty registration card
Calibration certificate
Flash drive with product manuals (English, Chinese, German, Portuguese, Spanish, French, Italian, Korean, Japanese, Russian and Turkish) and SmartView® software

Fluke TiX640 Infrared Camera

$7,290.00
Add to Cart
Features
The first HD infrared camera with our Fluke Connect™ technology– 10 times the on-camera pixels than standard 320x240 cameras (1024x768 resolution, 786,432 pixels)
Enhanced image quality and temperature measurement accuracy– get 4 times the resolution and pixels than standard mode with SuperResolution (up to 3,145,728 pixels)
Work from greater distances. See a 5 mm (0.2 in) target from 35 m (115 ft) away using the TiX1000 with the Super Telephoto lens
Get a premium in-field viewing experience for quick issue identification with the large 5.6 inch high resolution LCD screen
Save time focusing with the most advanced focus options available for consistently in focus image: LaserSharp ® Auto Focus, auto focus, manual and EverSharp multifocal

recording features–available on one camera.
The Fluke Expert Series offers the best flexibility of the entire Fluke infrared camera portfolio to capture spectacular images close up or from a distance. The TiX640

is compatible with 8 lens options (2x and 4x telephoto lenses, 2 wide angle lenses, 3 macro lenses and 1 standard lens) so great images can be captured despite certain

obstacles.

Include:
Rechargeable battery (2 for TiX1000 and TiX660; 1 for TiX640)
Battery charger and adapter
AC adapter
SD card reader
FC SD card for Fluke Connect
Protective lens cap
Hand strap
Neck strap
Carrying case
Warranty card
Safety instructions
Calibration certificate
CD includes product manuals

Fluke TiX660 Infrared Camera

$9,850.00
Add to Cart
Features:
The first HD infrared camera with our Fluke Connect™ technology– 10 times the on-camera pixels than standard 320x240 cameras (1024x768 resolution, 786,432 pixels)
Enhanced image quality and temperature measurement accuracy– get 4 times the resolution and pixels than standard mode with SuperResolution (up to 3,145,728 pixels)
Work from greater distances. See a 5 mm (0.2 in) target from 35 m (115 ft) away using the TiX1000 with the Super Telephoto lens
Get a premium in-field viewing experience for quick issue identification with the large 5.6 inch high resolution LCD screen
Save time focusing with the most advanced focus options available for consistently in focus image: LaserSharp ® Auto Focus, auto focus, manual and EverSharp multifocal

recording features–available on one camera.
The Fluke Expert Series offers the best flexibility of the entire Fluke infrared camera portfolio to capture spectacular images close up or from a distance. The TiX660

is compatible with 8 lens options (2x and 4x telephoto lenses, 2 wide angle lenses, 3 macro lenses and 1 standard lens) so great images can be captured despite certain

obstacles.

Include:
Rechargeable battery (2 for TiX1000 and TiX660; 1 for TiX640)
Battery charger and adapter
AC adapter
SD card reader
FC SD card for Fluke Connect
Protective lens cap
Hand strap
Neck strap
Carrying case
Warranty card
Safety instructions
Calibration certificate
CD includes product manuals

Fluke TiX1000 Infrared Camera with Eyepiece

$13,960.00
Add to Cart
Features
The first HD infrared camera with our Fluke Connect™ technology– 10 times the on-camera pixels than standard 320x240 cameras (1024x768 resolution, 786,432 pixels)
Enhanced image quality and temperature measurement accuracy– get 4 times the resolution and pixels than standard mode with SuperResolution (up to 3,145,728 pixels)
Work from greater distances. See a 5 mm (0.2 in) target from 35 m (115 ft) away using the TiX1000 with the Super Telephoto lens
Get a premium in-field viewing experience for quick issue identification with the large 5.6 inch high resolution LCD screen
Save time focusing with the most advanced focus options available for consistently in focus image: LaserSharp ® Auto Focus, auto focus, manual and EverSharp multifocal

recording features–available on one camera.
The Fluke Expert Series offers the best flexibility of the entire Fluke infrared camera portfolio to capture spectacular images close up or from a distance. The

TiX1000 is compatible with 8 lens options (2x and 4x telephoto lenses, 2 wide angle lenses, 3 macro lenses and 1 standard lens) so great images can be captured despite

certain obstacles.


Include:
Rechargeable battery (2 for TiX1000 and TiX660; 1 for TiX640)
Battery charger and adapter
AC adapter
SD card reader
FC SD card for Fluke Connect
Protective lens cap
Hand strap
Neck strap
Carrying case
Warranty card
Safety instructions
Calibration certificate
CD includes product manuals

Fluke TI105/FCA TI105 IR Cam with DMM A3001 FC iFlex Kit

$1,720.00
Add to Cart
Features
TI105 IR Cam with DMM A3001 FC iFlex Kit
Exclusive IR-OptiFlex ™  focus system—ensures that images are in good focus from 1.2 meters (4 feet) and beyond for optimum image clarity and scanning convenience. For shorter distances change to manual mode with the touch of a finger (Ti110 and Ti125).
Always have references handy—IR-PhotoNotes annotation system—Quickly identify and keep track of inspection locations by adding digital images of important information and surrounding areas (Ti110 and Ti125).
Find problems faster and easier with Fluke IR-Fusion technology (Ti125, Ti110, Ti105). Accurately identify potential issues by combining digital and IR images.
Get further clarification with AutoBlend mode—the blending of a digital and partially transparent IR image into a single information-filled image (Ti125 only).
Multi-mode video recording—focus-free video in visible light and infrared with full IR-Fusion. (Ti110 and Ti125 only).
Easily communicate the location of problems with the Electronic 8-Point Cardinal Compass (Ti110 and Ti125 only).

Fluke Connect Features:
Fluke Connect allows you to wirelessly transfer data from your existing Fluke tools to your smart phone
Fits over the IR port of your existing Fluke tools
Upgradeable by USB
Immediately enables you to graph, save, and share the tool’s readings with your team from your smart phone

Include :
SmartView® analysis and reporting software
2 GB SD memory card
USB connection cable for image transfer to PC
Hand strap, for right- or left-handed use
1 Lithium-Ion removable and rechargeable smart battery
AC charger/power supply with mains adapters for battery charging and AC operation
Soft case with adjustable shoulder strap
Rugged Fluke hard transport and storage case

Fluke Ti110 Industrial-Commercial Thermal Imager 30hz

$1,640.00
Add to Cart
Features :
IR-OptiFlex focus system: Helps you inspect your facility significantly faster with Fluke's revolutionary, ultra-rugged focus system. IR-OptiFlex gives you optimum focus by combining focus-free ease-of-use from four feet (1.2 M) and beyond with the flexibility of manual focus for distances of less than four feet, whether you are concentrating on overheating motors, scanning electrical connections, or monitoring processes
IR-Fusion technology: Experience three viewing modes (including Picture-in-Picture mode), with 11 color palette options to help you see and document problem areas.
Multi-mode video recording: Experience video recording in visible and infrared with IR-Fusion capabilities. Monitor problems over time, easily create video reports, analyze and troubleshoot frame by frame. Easily download to PCs for video viewing and analysis.
Electronic compass: The Ti110 comes equipped with an electronic eight-point cardinal compass that further clarifies the location of a problem—extremely useful when documenting and communicating issues to management or maintenance staff. Compass readings can easily be inserted into images and reports
IR-PhotoNotes annotation system: Get an exact reference of your problem area by attaching up to three visible light photos per infrared image. Capture digital images of surrounding areas, equipment, or any other helpful information.
Built rugged: The new Fluke imagers are slim and light, yet rugged and reliable. They've been designed to withstand a 2-meter drop, and have been put through a battery of tests, including vibration, extreme temperature, high humidity, and electromagnetic/radio frequency interference to ensure they survive in your harsh environment
Voice annotation: Add 60 seconds of voice annotation directly on the camera to quickly note and record comments in the field. You can easily review voice comments on camera or in SmartView® software. No clumsy headsets, microphones or earpieces are necessary.
Laser pointer/torch:  Our laser pointer allows you to accurately point out an area of concern to a colleague, while our torch (flashlight) allows you to illuminate dark places such as electrical cabinets or poorly lit mechanical rooms.
One-hand operation: The Ti110 has been ergonomically designed for simple, one-handed operation. Its lightweight, slim profile makes it easy to operate in either landscape or portrait format – your choice. All so you'll have one hand free to steady yourself or hold another tool

Include:
AC power adapter
Lithium ion smart battery
USB cable
SD memory card
Hard Carrying Case
Soft Transport Bag
Adjustable hand strap (left- or right-handed use),
Printed users manual in English, Spanish, French, German and Simplified Chinese
All other manuals on CD—total of 18
SmartView software
Warranty Registration card

Fluke TI95/FCA Ti95 IR Camera with DMM a3001 FC iFlex Kit

$835.00
Add to Cart
The Fluke Ti95 Infrared Camera offers:
The only wireless industrial thermal imager in its price class1 – take advantage of the benefits of Fluke Connect™ by seamlessly gathering and sharing inspection results instantly
Superior image quality, up to 84% better spatial resolution than other competitive models in this price class1
80 x 80 resolution
Removable 4GB SD memory card
8 GB Fluke Connect™ wireless SD Card
Find potential problems faster and easier with IR-Fusion® picture-in-picture mode
2 megapixel built-in digital camera
Large 3.5 inch LCD - 32% larger screen than other competitive models lets you clearly see what you are measuring
Smart Battery System - Lithium ion smart battery pack with five-segment LED display to show charge level
Rugged, lightweight, point–and–shoot thermal imager

Include:
AC power adapter
Lithium ion smart battery (1)
USB cable
SD memory card
Fluke Connect™ wireless SD Card (where available, shipped separately in non-European countries)
Soft transport bag
Adjustable hand strap (left- or right-handed use)
Printed users' manual in English, Spanish, French, German and Simplified Chinese, all other manuals on CD
SmartView® software
Warranty registration card

Fluke 3000 FC Wireless Digital Multimeter with three AA batteries - installed:
TL175 Test Leads (1 pair)
AC175 Alligator Clips (1 pair)
C3003 3-compartment soft case
Information pack

Fluke a3001 FC Wireless iFlex AC Current Module with two AA batteries - installed:
iFlex 10" coil (1)
Magnet/strap (1)

Fluke Ti100 General Use Thermal Imager 9Hz

$815.00
Add to Cart
Features
Rugged, lightweight, point–and–shoot focus–free thermal imaging camera
Laser pointer to assist in showing where problems exist
Capture current measurements fast and conveniently from up to five wireless modules at once using your Fluke thermal imaging camera and CNX wireless modules.
Spend less time finding problems and more time solving them with the innovative, rugged and easy to use Ti100 Infrared Camera.
Include:
AC power adapter
Lithium ion smart battery
USB cable
SD memory card
Hard Carrying Case
Soft Transport Bag
Adjustable hand strap (left- or right-handed use),
Printed users manual in English, Spanish, French, German and Simplified Chinese
All other manuals on CD—total of 18
SmartView software
Warranty Registration card

Fluke TiR1 Thermal Imager

$2,550.00
Add to Cart
IR-Fusion Technology
See things both ways - infrared and visual (visible light) images
fused together communicating critical information faster and easier -
traditional infrared images are no longer enough. IR-Fusion, a
patent-pending technology that simultaneously captures a digital photo
in addition to the infrared image and fuses it together taking the
mystery out of IR image analysis. IR-Fusion is standard on TiR1
models.

Includes:
-Thermal imaging camera
- AC power supply/battery charger (including mains adapters)
- SD memory card
- SD card reader (USB) for downloading images into your computer
- SmartView software with free software upgrades for life
- Rugged hard carrying case
- Soft transport bag
- Hand strap
- Users manual
- Warranty registration card

Fluke 190-502/AM/S Color ScopeMeter, 500 MHz, 2 channels plus DMM/Ext.input

$1,960.00
Add to Cart
Features
Color ScopeMeter, 500 MHz, 2 channels plus DMM/Ext.input, with SCC-290 kit included
Up to four independent floating isolated inputs, up to 1000 V
Up to 5 GS/s real time sampling (Depending on model and channels used)
Deep memory: 10,000 points per trace waveform capture (scope mode)
CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
Up to seven hours of battery operation using BP291
Isolated USB host port for direct data storage to a USB memory device; USB device port for easy PC communication
Easy access battery door for quick battery swaps in the field
Compact and only 2.2 kg (4.8 lb)
Security slot: lock down oscilloscope with Kensington® lock while unattended
IP 51 rating, dust- and drip-proof
Connect-and-View™ triggering for intelligent, automatic triggering on fast, slow and even complex signals
Frequency Spectrum using FFT-analysis
Automatic capture and REPLAY of 100 screens
ScopeRecord™ Roll mode gives 30,000 points per input channel for low frequency signal analysis
TrendPlot™ paperless recorder mode with deep memory for long-term automatic measurements
5,000 count DMM included in the 2-channel models

Include:
VPS410 Voltage Probe Sets (one red, one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
USB Interface Cable
SCC290 kit (FlukeView Software for ScopeMeter (SW90W) and Hard Shell Carrying Case (C290))

Fluke 805 FC Fluke Connect Vibration Meter

$650.00
Add to Cart
Features
805 FC Fluke Connect Vibration Meter
Innovative sensor design minimizes measurement variations caused by device angle or contact  pressure
Consistent data quality at both low and high frequency ranges
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft Excel using pre-built templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud
Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ Share-Live  video call*
Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Spot IR Sensor increases diagnostic capabilities
On-board memory holds and saves up to 3,500 measurements
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing

Include:
805 FC Vibration Meter
USB Cable
Storage Case
Belt Holster
Quick Reference Guide
CD-ROM (includes MS Excel template and documentation)
Four AA batteries.

Fluke 124B/NA/S Industrial ScopeMeter Handheld Oscilloscope

$720.00
Add to Cart
Features
124B/NA/S Industrial ScopeMeter Handheld Oscilloscope 40MHz and SCC Kit (North America)
Dual-input digital oscilloscope and multimeter
40 MHz or 20 MHz oscilloscope bandwidth
Two 5,000-count true-rms digital multimeters
Connect-and-View™ trigger simplicity for hands-off operation
IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
Dual-input waveform and meter reading recorder for trending data over extended periods
Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
Shielded test leads for oscilloscope, resistance and continuity measurements
Resistance, continuity, diode and capacitance meter measurements
Power measurements (W, VA, VAR, PF, DPF, Hz)
Voltage, current and power harmonics
Check Industrial networks with BusHealth physical layer tests against defined reference levels
Save or recall data and instrument setups
Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures.
External optically isolated USB interface to transfer, archive and analyze scope or meter data
Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app*
FlukeView® ScopeMeter® Software for Windows®
Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
Highest safety rating in the industry: safety rated for CAT IV 600 V
Li-Ion rechargeable battery, seven-hours operation (with four-hour charge time)

Include:
Fluke 124B Hand-Held Oscilloscope
Shielded Test Leads with Black Ground Leads
Test Lead Black (for Grounding)
Hook Clips (red, blue)
Banana-to-BNC Adapters (black, x1)
10:1 Voltage Probe
USB Angled Adapter
WiFi USB Adapter*
Switch Mode Power Supply, Adapter/Battery Charger
Rechargeable Li-ion Battery Pack
Soft Carrying Case
Magnetic Hanger
FlukeView® ScopeMeter® Software for Windows®
Screen Protector

Fluke 123B/NA/S Industrial ScopeMeter Handheld Oscilloscope 20MHz

$625.00
Add to Cart
Features
123B/NA/S Industrial ScopeMeter Handheld Oscilloscope 20MHz and SCC Kit (North America)
Dual-input digital oscilloscope and multimeter
40 MHz or 20 MHz oscilloscope bandwidth
Two 5,000-count true-rms digital multimeters
Connect-and-View™ trigger simplicity for hands-off operation
IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
Dual-input waveform and meter reading recorder for trending data over extended periods
Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
Shielded test leads for oscilloscope, resistance and continuity measurements
Resistance, continuity, diode and capacitance meter measurements
Power measurements (W, VA, VAR, PF, DPF, Hz)
Voltage, current and power harmonics
Check Industrial networks with BusHealth physical layer tests against defined reference levels
Save or recall data and instrument setups
Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures.
External optically isolated USB interface to transfer, archive and analyze scope or meter data
Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app*
FlukeView® ScopeMeter® Software for Windows®
Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
Highest safety rating in the industry: safety rated for CAT IV 600 V
Li-Ion rechargeable battery, seven-hours operation (with four-hour charge time)

Include:
Fluke 123B Hand-Held Oscilloscope
Shielded Test Leads with Black Ground Leads
Test Lead Black (for Grounding)
Hook Clips (red, blue)
Banana-to-BNC Adapters (black, x1)
USB Angled Adapter
WiFi USB Adapter*
Switch Mode Power Supply, Adapter/Battery Charger
Rechargeable Li-ion Battery Pack
Soft Carrying Case
Magnetic Hanger
FlukeView® ScopeMeter® Software for Windows®
Screen Protector

Fluke 438-II Power Quality and Motor Analyzer with shipping

$2,615.00
Add to Cart
Features
Measure key parameters on direct-on-line motors including torque, RPM, mechanical power and motor efficiency
Perform dynamic motor analysis by plotting of motor derating factor against load according to NEMA/IEC guidelines
Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you're ready to go
Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency
Identify power quality issues such as dips, swells, transients, harmonics and unbalance
PowerWave data technology captures fast RMS data, and shows half-cycle averages and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)
Waveform capture function captures 100/120 cycles (50/60 Hz) of each event detected event, in all modes, without set-up
Automatic transient mode captures waveform data at 200 kS/s on all phases simultaneously up to 6 kV
Fluke Connect® compatible* – view data locally on the instrument, via Fluke Connect mobile app and PowerLog 430-II desktop software
Safety rated for industrial applications 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream

Include:
Test lead set
i430 Thin flexible current probes (4)
Battery
Power adapter
Combination WiFi/SD card
Soft carry case
CD Rom with PowerLog 430-II software and user documentation

Fluke 43B/003 Power Quality Analyzer

$1,020.00
Add to Cart
Features
New! NiMH Battery provides extended operating time of 6.5 hours
Combines the most useful capabilities of a power quality analyzer, multimeter and scope
Calculates 3-phase power on balanced loads, from a single-phase measurement
Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
Monitoring functions help track intermittent problems and power system performance
Records two selectable parameters for up to 16 days
20 measurement memories to save/recall screens and data with cursor readings
FlukeView software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
Measures resistance, diode voltage drop, continuity, and capacitance
Users/applications manual and power quality video to help answer tough questions
Complete package with voltage probes and 400 A current clamp, FlukeView Software and optically isolated interface cable
3 year warranty on the Fluke 43B, 1 year on accessories

Include:
C120 Hard Case
Test Leads
Industrial Test Clips
Large Jaw Alligator Clips
TP1 Flat-tipped Slim-Reach Test Probes
TP4 4 mm Round Slim-Reac Test Probes
i400s 400 A AC Current Clamp
OC4USB Optically Isolated USB Interface Adapter
BP120MH Rechargeable NiMH Battery Pack (installed)
PM 8907 Line Voltage Adapter/Battery Charger
SW43W FlukeView Power Quality Analyzer Software for Windows
Power Quality CD with:
 User’s manual
 Power quality video
 Application guide
Shielded Banana-to-BNC Adapter
Users Manual / Application Guide

Fluke 435-II Three-Phase Power Quality and Energy Analyzer

$2,090.00
Add to Cart
Features
Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp.
PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.).
Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up.
Automatic Transient Mode: 435 and 437 Series II analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV.
Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available).
Fully Class-A compliant: 435 and 437 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard.
400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems.
Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places.
Automatic Trending: Every measurement is always automatically recorded, without any set-up.
System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
View graphs and generate reports: With included analysis software.
Battery life: Seven hours operating time per charge on Li-ion battery pack.
Mains signaling: 435 and 437 Series II analyzers measure interference from ripple control signals at specific frequencies.

Include:
BC430 Power Adapter
International plug adapter set
BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)
TL430 Test lead and Alligator clip set
WC100 color coding clips and regional decals
i430flex-TF, 24 inch (61cm) length, 4 clamps
8 GB SD card
PowerLog on CD (includes operator manuals in PDF format)
USB cable A-Bmini
C1740 Soft Case

Fluke N4K 1PP42 Norma 4000 High Precision Power Analyzer

$2,230.00
Add to Cart
Features
Single phase with PP42 power phase input module
Compact design makes it easy to carry and saves working space.
Simple user interface ensures easy, intuitive operation.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
All inputs are galvanically isolated to avoid short circuits in all applications.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
5 test leads and clips
Space for three power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 3PP50IP Norma 5000 High Precision Power Analyzer

$5,450.00
Add to Cart
Features
Three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N4K 3PP50IP Norma 4000 High Precision Power Analyzer

$5,390.00
Add to Cart
Features
Three phase with 3xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
All inputs are galvanically isolated to avoid short circuits in all applications.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
Compact design makes it easy to carry and saves working space.
Simple user interface ensures easy, intuitive operation.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
5 test leads and clips
Space for three power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 6PP42IB Norma 5000 High Precision Power Analyzer

$5,820.00
Add to Cart
Features
Three phase with 6xPP42 power phase input modules with current binding post with IEEE488 / Ethernet interface
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke 1760 TR US Three Phase Power Quality Recorder Topas

$5,970.00
Add to Cart
Features
10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions
Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
GPS time synchronization: Correlate data with events or datasets from other instruments with precision
Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
Uninterrupted power supply (40 minutes): Never miss important events - even record the beginning and end of interruptions and outages to help determine the cause
Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode

Include:
Internal Flash-memory 2 GB
PQ Analyze software on CD-ROM
Ethernet cable for network connection (1)
Crosslink Ethernet cable for direct PC connection (1)
Mains cable (1)
Operational manuals
Carrying bag
Fast transient analysis up to 10 MHz
Voltage probes, qty 4 (600 V for INTL set, 1000 V for US set)
Current probes, qty 4 (Dual-range flexible current probes 1000 A / 200 A AC)
GPS time sync receiver

Fluke N5K 4PP54IP Norma 5000 High Precision Power Analyzer

$6,090.00
Add to Cart
Features
Three phase with 4xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values


Fluke N5K 6PP42IBR Norma 5000 High Precision Power Analyzer

$6,940.00
Add to Cart
Features
Three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 3PP64IPR Norma 5000 High Precision Power Analyzer

$7,420.00
Add to Cart
Features
Three phase with 3xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 6PP54IP Norma 5000 High Precision Power Analyzer

$7,730.00
Add to Cart
Features
Three phase with 6xPP54 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values


Fluke N5K 6PP50IPR Norma 5000 High Precision Power Analyzer

$7,950.00
Add to Cart
Features
Three phase with 6xPP50 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 6PP64I Norma 5000 High Precision Power Analyzer

$8,950.00
Add to Cart
Features
Three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include :
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 6PP64IR Norma 5000 High Precision Power Analyzer

$9,360.00
Add to Cart
Features
Three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and printer
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 6PP64IP Norma 5000 High Precision Power Analyzer

$10,150.00
Add to Cart
Features
Three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke N5K 6PP64IPR Norma 5000 High Precision Power Analyzer

$11,360.00
Add to Cart
Features
Three phase with 6xPP64 power phase input modules with IEEE488 / Ethernet interface and analog / digital output channels and printer
Bandwidth from dc to 3 MHz / 10 MHz for reliable measurement precision.
4 MB on-board memory (expandable to 128 MB) for storage of measured values.
All inputs are galvanically isolated to avoid short circuits in all applications.
Simple user interface ensures easy, intuitive operation.
Compact design makes it easy to carry and saves working space.
A variety of standard configurations allows users to choose the exact functionality required for their unique application.
Simultaneous parallel acquisition of all phases allows accurate viewing of dynamic events on all phases at exactly the same point in time.
Voltage, current and power harmonics measured up to the 40th harmonic for complete analysis.
FFT analysis, vector diagram, and Digital Oscilloscope (DSO) mode included in the base unit for complete analysis capability.
User-selectable average time – from 15ms up to 3600s – for dynamic measurements.
Fast and easy connection to a PC – RS232 and USB included as standard; optional IEEE488, Ethernet, or USB2.0.
PI1 process interface to measure torque and speed with external sensors, plus four analog outputs for easy use on motor and drive applications.
341kHz or 1 MHz sample rates for detailed signal analysis.
Fluke NormaView PC software for data download, analysis & report writing.

Include:
Power supply cable
5.7“ / 144 mm color display
Fluke NormaView PC software
Internal printer
Space for six power-phases and options
RS232/USB interface for data download
User’s manual
Test certificate
Calibration values

Fluke 1730/US Portable Energy Logger US version

$920.00
Add to Cart
Features
1730/US Portable Energy Logger US version
Key measurements: voltage, current, power, power factor and associated values enable energy saving strategies to be implemented.
Bright, color touch screen: perform convenient in-the-field analysis and data checks with full graphical display.
Comprehensive logging: all measured values are automatically logged and can be reviewed during logging and before downloading for on the-go analysis. More than 20 separate logging sessions can be stored on the instrument.
Optimized user interface: quick, guided, graphical setup ensures you’re capturing the right data every time, and the intelligent verification function indicates correct connections have been made, reducing user uncertainty.
Complete ‘in-the-field’ setup through the front panel: no need to return to the workshop for download and setup or to take a computer to the electrical panel.
Wide range power: power instrument directly from the measured circuit eliminating the need to find a power outlet while allowing the instrument to be secured safely inside electrical panels.
Two USB ports: one for PC connection and another for fast, simple download to standard USB thumb drives, or other USB devices.
Compact size: designed to fit in tight spaces and panels.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream.
Optimized measurement accessories: flat voltage cable and thin flexible current probes ensure easy installation even in tight spaces.
Battery life: four-hour operating time (backup time) per charge on lithium-ion battery.
Security: safeguard against theft with a Kensington lock.
All new, Energy Analyze application soft-ware: download, analyze and automated reporting for a complete picture of energy saving potential.

Include:
- Power Supply
- Voltage Test Lead
- Dolphin Clip, Black
- i1730-flex1500 Thin-Flexi Current Probe, 30.5 cm (12 in)quantity 3. Measures to 1500A AC. If more needed, then order the 1730/BASIC and the needed CTs separately
- Color-coded Wire Clips
- Power Cord
- Test lead with stackable plugs, 10 cm (3.9 in)
- Test lead with stackable plugs, 2 m (6.6 ft)
- DC Power Cable
- USB Cable A, Mini-USB
- Soft Storage Bag/Case
- Input Connector Decal
- Documentation Info Pack (Quick Reference Card, Safety Information, Battery Pack Safety Information, iFlex Probe Safety Information, i40s-EL Current Clamp Safety Information
- 4 GB USB Flash Drive (includes Users Manual and PC application software, Fluke Energy Analyze)

Fluke 1743 Basic Power Quality Logger Memobox

$1,350.00
Add to Cart
Features
Determines the root cause: Included PQ Log software quickly analyzes trends, creates statistical summaries, and generates detailed graphs and tables
Measure voltage with premium accuracy: IEC61000-4-30 Class-A compliant voltage accuracy (0.1%)
Plug and play: Setup in minutes with automatic current probe detection and powering
Installs inside the cabinet: Compact, fully-insulated housing and accessories fit easily in tight spaces next to live power
Monitors power for the long-term: Data can be downloaded during recording without interruption
Rugged and reliable: Designed for everyday field use with no moving parts and durable insulated case with two year warranty
Quickly validate quality of power: Assess power quality according to EN50160 power quality standard with statistical overview

Include:
CD-ROM with PQ Log software
RS232 interface cable and RS232-USB adapter
Test leads for voltages and power supply
4 black dolphin clips
Color localization kit
Carrying bag
Test certificate with measurement values
Printed English manual
Multi-language manual CD

Fluke 1736/EUS Portable Power Logger EU/US Version

$1,410.00
Add to Cart
Features :
3-Phase Energy Logger EU/US Version
Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values.
Fluke Connect® compatible*: View data locally on the instrument or via Fluke Connect mobile app and desktop software.
Convenient instrument powering: Power instrument directly from the measured circuit.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream.
Measure all three phases and neutral: With included 4 flexible current probes.
Comprehensive logging: More than 20 separate logging sessions can be stored on the instruments. In fact, all measured values are automatically logged so you never loose measurement trends. They can even be reviewed during logging sessions and before downloading for real-time analysis.
Capture dips, swells, and inrush currents: Includes event waveform snapshot and high resolution RMS profile, along with date, timestamp and severity to help pinpoint potential root causes of power quality issues.
Bright, color touch screen: Perform convenient in-the-field analysis and data checks with full graphical display.
Optimized user interface: Capture the right data every time with quick, guided, graphical setup and reduce uncertainty about your connections with the intelligent verification function.
Complete "in-the-field" setup through the front panel or Fluke Connect App: No need to return to the workshop for download nd setup or to take a computer to the electrical panel.
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting.

Include :
1736 Power Logger
WiFi only adapter
USB flash drive (4GB)
USB Cable
3PHVL-173 Flat Cable
1x red, 1x black 0.1m cable
1x red, 1x black 1.5m lead
Alligator clips
C173x Soft Case
Color Coding set
i173X- flex1500 12" (4)
Line cord

Fluke 1743 Power Quality Logger Memobox

$1,530.00
Add to Cart
Features
Plug and play: Setup in minutes with automatic current probe detection and powering
Installs inside the cabinet: Compact, fully-insulated housing and accessories fit easily in tight spaces next to live power
Determines the root cause: Included PQ Log software quickly analyzes trends, creates statistical summaries, and generates detailed graphs and tables
Monitors power for the long-term: Data can be downloaded during recording without interruption
Measure voltage with premium accuracy: IEC61000-4-30 Class-A compliant voltage accuracy (0.1%)
Quickly validate quality of power: Assess power quality according to EN50160 power quality standard with statistical overview
Rugged and reliable: Designed for everyday field use with no moving parts and durable insulated case with two year warranty

Include :
4 Flexible probes 15/150/1500/3000 A with 2 m cable
CD-ROM with PQ Log software
RS232 interface cable and RS232-USB adapter
Test leads for voltages and power supply
4 black dolphin clips
Color localization kit
Carrying bag
Test certificate with measurement values
Printed English manual
Multi-language manual CD

Fluke 1738/EUS 3-Phase Portable Advanced Power Logger EU/US Version

$1,650.00
Add to Cart
Features :
3-Phase Energy Logger EU/US Version
Key measurements: Automatically capture and log voltage, current, power, harmonics and associated power quality values.
Fluke Connect® compatible*: View data locally on the instrument or via Fluke Connect mobile app and desktop software.
Convenient instrument powering: Power instrument directly from the measured circuit.
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream.
Measure all three phases and neutral: With included 4 flexible current probes.
Comprehensive logging: More than 20 separate logging sessions can be stored on the instruments. In fact, all measured values are automatically logged so you never loose measurement trends. They can even be reviewed during logging sessions and before downloading for real-time analysis.
Capture dips, swells, and inrush currents: Includes event waveform snapshot and high resolution RMS profile, along with date, timestamp and severity to help pinpoint potential root causes of power quality issues.
Bright, color touch screen: Perform convenient in-the-field analysis and data checks with full graphical display.
Optimized user interface: Capture the right data every time with quick, guided, graphical setup and reduce uncertainty about your connections with the intelligent verification function.
Complete "in-the-field" setup through the front panel or Fluke Connect App: No need to return to the workshop for download nd setup or to take a computer to the electrical panel.
Energy Analyze Plus application software: Download and analyze every detail of energy consumption and power quality state of health with our automated reporting.

Include:
1738 Power Logger
WiFi/Bluetooth adapter (1738 only)
USB flash drive (4GB)
USB Cable
3PHVL-173 Flat Cable
1x red, 1x black 0.1m cable
1x red, 1x black 1.5m lead
Alligator clips
C173x Soft Case
Color Coding set
i173X- flex1500 12" (4)
Magnetic Probes (1738 only)
Magnetic hanger kit (1738 only
Line cord

Fluke 1744 Power Quality Logger Memobox

$2,090.00
Add to Cart
Features
Rugged and reliable: Designed for everyday field use with no moving parts and durable insulated case with two year warranty
Installs inside the cabinet: Compact, fully-insulated housing and accessories fit easily in tight spaces next to live power
Plug and play: Setup in minutes with automatic current probe detection and powering
Measure voltage with premium accuracy: IEC61000-4-30 Class-A compliant voltage accuracy (0.1%)
Determines the root cause: Included PQ Log software quickly analyzes trends, creates statistical summaries, and generates detailed graphs and tables
Monitors power for the long-term: Data can be downloaded during recording without interruption
Quickly validate quality of power: Assess power quality according to EN50160 power quality standard with statistical overview

Include:
Printed English manual
Color localization kit
RS232 interface cable and RS232-USB adapter
4 Flexible probes 15/150/1500/3000 A with 2 m cable
CD-ROM with PQ Log software
Test leads for voltages and power supply
4 black dolphin clips
Carrying bag
Test certificate with measurement values
Multi-language manual CD

Fluke 190-504/AM/S Color ScopeMeter, 500 MHz, 4 channels with SCC-290 kit included

$1,840.00
Add to Cart
Features :
Color ScopeMeter, 500 MHz, 4 channels with SCC-290 kit included
Two independent floating isolated inputs, up to 1000 V
Up to 5 GS/s real time sampling (Depending on model and channels used)
Deep memory: 10,000 points per trace waveform capture (scope mode)
CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
Up to seven hours of battery operation using BP291
Isolated USB host port for direct data storage to a USB memory device; USB device port for easy PC communication
Easy access battery door for quick battery swaps in the field
Compact and only 2.2 kg (4.8 lb)
Security slot: lock down oscilloscope with Kensington® lock while unattended
IP 51 rating, dust- and drip-proof
Connect-and-View™ triggering for intelligent, automatic triggering on fast, slow and even complex signals
Frequency Spectrum using FFT-analysis
Automatic capture and REPLAY of 100 screens
ScopeRecord™ Roll mode gives 30,000 points per input channel for low frequency signal analysis
TrendPlot™ paperless recorder mode with deep memory for long-term automatic measurements
5,000 count DMM included in the 2-channel models

Include:
4x TRM 50; Coaxial Feed through connector
4x VPS 410-x (one red, one blue, one grey, one green)
BC 190 Energy efficient Universal Power Supply 100-240V ±10%
BP 291 High capacity Li-ion battery pack (4800mAh)
Flukeview™ Software limited demo version  
Hanging strap and hand strap
Multi-language user manuals on CD-ROM
USB interface cable

Fluke Ti40FT IR FlexCam Thermal Imager with IR-Fusion Technology

$5,050.00
Add to Cart
Description:
The Fluke Ti4x models feature everything needed for virtually every
thermography task. With a 160 x 120 detector and a temperature
sensitivity down to 0.08°C (80mK) (NETD) they deliver high resolution
images where even the smallest temperature differences can be seen.
The units are extremely easy to use through the Windows(R) CE menu
structure and offer an extended troubleshooting feature set to allow
on the spot analysis in the field.
The FT models feature the innovative IR-Fusion(R) technology. IR-Fusion
captures a visible light image in addition to the infrared image and
takes the mystery out of IR image analysis. It helps to better
identify and report suspect components and enable the repair to be
done right the first time. To find out more select IR-Fusion on the
side navigation of this page.

Included Accessories:
- Carrying Case
- LCD Cleaning Cloth
- AC adapters (2)
- Auxiliary AC Power Supply (Ti45 only)
- AC Patch Cord
- Neck Strap
- Video Cable
- AC Power Supply
- Battery Charger
- Compact Flash Memory Card Reader with PCMCIA Adapter
- Two Batteries
- Compact Flash Memory Card Reader with USB Adapter
- SmartView Software CD with complete users Manual
- Compact Flash Software CD

Fluke 190-202/AM/S ScopeMeter Series II

$1,360.00
Add to Cart
Include:
VPS410 Voltage Probe Sets (one red, one blue)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
USB Interface Cable
SCC290 kit (FlukeView Software for ScopeMeter (SW90W) and Hard Shell Carrying Case (C290))

Fluke 190-062/AM/S Color Scopemeter Series II

$1,190.00
Add to Cart
Include:
VPS410 Voltage Probe Sets (one red, one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
USB Interface Cable
SCC290 kit (FlukeView Software for ScopeMeter (SW90W) and Hard Shell Carrying Case (C290)

Fluke 190-204/AM/S ScopeMeter Series II

$1,535.00
Add to Cart
Include:
VPS410 Voltage Probe Sets (one red, one blue, one grey, one green)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
USB Interface Cable
SCC290 kit (FlukeView Software for ScopeMeter (SW90W) and Hard Shell Carrying Case (C290))

Fluke 125B/NA/S Industrial ScopeMeter Handheld Oscilloscope

$940.00
Add to Cart
Features
125B/NA/S Industrial ScopeMeter Handheld Oscilloscope with Bus Health Test 40MHz and SCC Kit (North America)
Dual-input digital oscilloscope and multimeter
40 MHz or 20 MHz oscilloscope bandwidth
Two 5,000-count true-rms digital multimeters
Connect-and-View™ trigger simplicity for hands-off operation
IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
Dual-input waveform and meter reading recorder for trending data over extended periods
Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
Shielded test leads for oscilloscope, resistance and continuity measurements
Resistance, continuity, diode and capacitance meter measurements
Power measurements (W, VA, VAR, PF, DPF, Hz)
Voltage, current and power harmonics
Check Industrial networks with BusHealth physical layer tests against defined reference levels
Save or recall data and instrument setups
Store instrument setups defined by a test sequence for routine maintenance or most often used test procedures.
External optically isolated USB interface to transfer, archive and analyze scope or meter data
Optional WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app*
FlukeView® ScopeMeter® Software for Windows®
Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
Highest safety rating in the industry: safety rated for CAT IV 600 V
Li-Ion rechargeable battery, seven-hours operation (with four-hour charge time)

Include:
Fluke 125B Hand-Held Oscilloscope
Shielded Test Leads with Black Ground Leads
Test Lead Black (for Grounding)
Hook Clips (red, blue)
Banana-to-BNC Adapters (black, x1)
10:1 Voltage Probe
i400s AC Current Clamp
USB Angled Adapter
WiFi USB Adapter*
Switch Mode Power Supply, Adapter/Battery Charger
Rechargeable Li-ion Battery Pack
Soft Carrying Case
Magnetic Hanger
FlukeView® ScopeMeter® Software for Windows®
Screen Protector

Fluke 190-504/AM Color ScopeMeter, 500 MHz, 4 channels

$1,615.00
Add to Cart
Include:
4x TRM 50; Coaxial Feed through connector
4x VPS 410-x (one red, one blue, one grey, one green)
BC 190 Energy efficient Universal Power Supply 100-240V ±10%
BP 291 High capacity Li-ion battery pack (4800mAh)
Flukeview™ Software limited demo version  
Hanging strap and hand strap
Multi-language user manuals on CD-ROM
USB interface cable

Fluke 190-502/AM Color Scope Meter 500 MHz 2 channels plus DMM

$1,690.00
Add to Cart
Include:
VPS410 Voltage Probe Sets (one red, one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter® demo package (restricted functionality)
USB Interface Cable

Fluke Ti50FT IR FlexCam Thermal Imager with IR-Fusion Technology

$6,890.00
Add to Cart
Typical applications:
- Predictive maintenance - Identify electrical and mechanical problems
before they cause failure
- Power/utilities - Real-time analysis of substations, transmission
lines and equipment
- Process monitoring - Real-time observation to ensure efficient and
safe operation
- Research and development - Quantify heat patterns to improve product designs
- Electronic design - Close up circuit board analysis
Included Accessories:
- Carrying Case
- LCD Cleaning Cloth
- AC adapters (2)
- Auxiliary AC Power Supply (Ti55 only)
- AC Patch Cord
- Neck Strap
- Video Cable
- AC Power Supply
- Battery Charger
- Compact Flash Memory Card Reader with PCMCIA Adapter
- Two Batteries
- Compact Flash Memory Card Reader with USB Adapter
- SmartView Software CD with complete users Manual
- Compact Flash Software CD

Fluke TiR Thermal Imager

$1,650.00
Add to Cart
Description:
See things both ways - infrared and visual (visible light) images
fused together communicating critical information faster and easier -
traditional infrared images are no longer enough. IR-Fusion, a
patent-pending technology that simultaneously captures a digital photo
in addition to the infrared image and fuses it together taking the
mystery out of IR image analysis. IR-Fusion is standard on TiR models

Fluke TiR2-FT IR FlexCam Thermal Imager with IR-Fusion

$3,860.00
Add to Cart
Included:
- Heavy-duty carrying case
- 2 rechargeable battery packs
- Battery charger
- AC adapter
- Video cable
- 512 MB compact flash card
- Compact flash card reader
- USB cable
- PCMCIA compact flash card reader
- Neck strap
- SmartView reporting and analysis software on CD

Fluke TiR3-FT IR FlexCam Thermal Imager with IR-Fusion

$4,890.00
Add to Cart
- Industry Leading Thermal Sensitivity (≤0.050 °C NETD) Provides Solid
Resolution And Ultra High-Quality Images
- IR-Fusion Technology Automatically Merges Visual And Thermal Images
Pinpointing Trouble Areas Quicker By Automatically Relating Thermal
Images With The Real World (Included with TIR3-FT, Optional with TIR3)
- The 180° Articulating Lens Is Great For Viewing Around Obstructions
- The 5" High Resolution, High Contrast Display Is The Biggest Display
In The Industry
- 320 x 240 Focal Plane Array And 20mm High Quality Germanium Lens
With Continuous Single Finger Focus Provide Exceptional Image
Resolution
- SmartView Professional Report Writing Software Generates Fast, Easy
Customizable Reports Including Rich Image Analysis
- The Intuitive Operation With On-Camera Windows CE Interface Makes It
Easy To Use

Included Accessories:
- Heavy-Duty Carrying Case
- 2 Rechargeable Battery Packs
- Battery Charger
- Video Cable
- 512 MB Compact Flash Card
- USB Cable
- PCMCIA Compact Flash Card Reader
- Neck Strap
- SmartView Reporting And Analysis Software

Fluke TiR4-FT IR FlexCam Thermal Imager with IR-Fusion

$5,760.00
Add to Cart
Included Accessories:
- Heavy-Duty Carrying Case
- 2 Rechargeable Battery Packs
- Battery Charger
- AC Adapter
- Video Cable
- 512 MB Compact Flash Card
- USB Cable
- PCMCIA Compact Flash Card Reader
- Neck Strap
- SmartView Reporting And Analysis Software

Fluke Ti10 Thermal Imager

$1,725.00
Add to Cart
Included Accessories:
- 1 - AC power supply/battery charger (including mains adapters)
- 1 - SD memory card
- 1 - SD card reader (USB)
- 1 - SmartView software
- 1 - Rugged hard, carrying case
- 1 - Soft transport bag
- 1 - Hand strap
- 1 - Users manual
- 1 - Warranty registration card

Fluke Ti20 Thermal Imager

$2,450.00
Add to Cart
Included Accessories
- 1 - AC Power Adapter
- 1 - USB Communication Cable
- 1 - Hard Carrying Case
- 1 - Soft-sided Carrying Case
- 1 - Wrist Strap
- 1 - 2 Rechargeable Battery Packs
- 1 - 1 AA Battery Case
- 1 - Interactive CD with Training Materials
- 1 - Getting Started Guide
- 1 - Software and Manual CD

Fluke Ti25 Thermal Imager

$2,850.00
Add to Cart
Included Accessories
- 1 - AC power supply/battery charger (including mains adapters)
- 1 - SD memory card
- 1 - SD card reader (USB)
- 1 - SmartView software
- 1 - Rugged hard, carrying case
- 1 - Soft transport bag
- 1 - Hand strap
- 1 - Users manual
- 1 - Warranty registration card

Fluke DTX-1800 DTX CableAnalyzer Series Digital Cable Analyzer

$4,250.00
Add to Cart
Specification:
- DTX significantly reduces total certification costs up to 33% a year
- Three times faster than existing testers with 9-second Cat 6 Autotest
- Independently verified by UL to meet ISO Level IV and proposed TIA
Level IIIe Accuracy requirements
- Analyze test results and create professional test reports using
LinkWare reporting software
- Verify the availability of network and IP services using the Network
Service Module
- Perform Basic fiber certification five times faster with DTX Fiber Module
- Perform Extended fiber Certification with DTX Compact OTDR
Include:
- (1) Main and Smart Remote
- (1) LinkWare PC Software
- (1) 128MB MMC Card
- (2) Cat 6/Class E Permanent Link Adapters
- (2) Cat 6/Class E Channel Adapters
- (2) Headsets for Talk
- (1) Carrying Case
- (1) USB Interface Cable (Mini-B)
- (1) Serial RS-232 Cable (DB9 to IEEE1394)
- (1) User Manual
- AC Chargers

Fluke TiR 32 Thermal Imager

$3,290.00
Add to Cart
Includes:
Thermal Imaging Camera and standard infrared lens
AC power supply with battery pack charger and mains adapters
2 durable lithium ion smart battery packs
SD memory card
Multi format USB memory card reader so you can download images to your PC
SmartView software including free lifetime software upgrades
Hard, rugged carrying case
Soft transport bag
Adjustable hand strap
Users manual
Warranty registration card
Interactive training DVD

Fluke Ti32 Thermal Imager

$3,350.00
Add to Cart
Included:
Thermal imager with standard infrared lens
AC power supply and battery pack charger (including mains adapters)
Two, rugged lithium ion smart battery packs
SD memory card
Multi-format USB memory card reader for downloading images into your computer
SmartView® software with free software upgrades for life
Rugged, hard carrying case
Soft transport bag
Adjustable hand strap
Printed users manual
Warranty registration card
Interactive training DVD

Fluke 1750 Three-Phase Power Quality Recorder

$7,250.00
Add to Cart
Included:
1750 aquisition unit
PDA wireless “front panel interface” and charger power plug adapters
4 - 400A current probes (3140)
5 Test leads and clips
SD memory card
Fluke Power View and Fluke Power Analyze software
Power cord with international plug set
Ethernet cable
Color localization set
Printed Getting Started manual
Product CD with software and user manual PDF

Fluke Ti29 Thermal Imager

$3,060.00
Add to Cart
Included:
SmartView analysis and reporting software
2GB SD memory card
Multi-function card reader for downloading images into your computer
Rugged hard carry case and portable soft carry case
Hand strap, for right of left-handed use
2 Lithium-Ion removeable and rechargeable smart batteries
AC charger/power supply and two-bay external charger with mains adapters
Printed Users Manuals (16 languages available)

Fluke TI95/FCC Ti95 Thermal Imager and a3001 FC iFlex Kit

$685.00
Add to Cart
The Fluke Ti95 Infrared Camera offers:
The only wireless industrial thermal imager in its price class1 – take advantage of the benefits of Fluke Connect™ by seamlessly gathering and sharing inspection results instantly
Superior image quality, up to 84% better spatial resolution than other competitive models in this price class1
80 x 80 resolution
Removable 4GB SD memory card
8 GB Fluke Connect™ wireless SD Card
Find potential problems faster and easier with IR-Fusion® picture-in-picture mode
2 megapixel built-in digital camera
Large 3.5 inch LCD - 32% larger screen than other competitive models lets you clearly see what you are measuring
Smart Battery System - Lithium ion smart battery pack with five-segment LED display to show charge level
Rugged, lightweight, point–and–shoot thermal imager

Include:
Fluke Ti95 Thermal Imager:
AC power adapter
Lithium ion smart battery (1)
USB cable
SD memory card
Fluke Connect™ wireless SD Card (where available, shipped separately in non-European countries)
Soft transport bag
Adjustable hand strap (left- or right-handed use)
Printed users' manual in English, Spanish, French, German and Simplified Chinese, all other manuals on CD
SmartView® software
Warranty registration card

Fluke a3001 FC Wireless iFlex AC Current Module with two AA batteries - installed:
iFlex 10" coil (1)
Magnet/strap (1)
Information pack

Fluke Ti95 9HZ General Use Thermal Imager

$640.00
Add to Cart
Features
The only wireless industrial thermal imager in its price class1 – take advantage of the benefits of Fluke Connect™ by seamlessly gathering and sharing inspection results instantly
Superior image quality, up to 84% better spatial resolution than other competitive models in this price class1
80 x 80 resolution
Removable 4GB SD memory card
8 GB Fluke Connect™ wireless SD Card
Get context for the infrared image by switching to the full visible (IR-Fusion® AutoBlend™ mode and Picture-in-Picture available in SmartView® software)
2 megapixel built-in digital camera
3.5 inch LCD
Smart Battery System - Lithium ion smart battery pack with five-segment LED display to show charge level
Rugged, lightweight, point–and–shoot thermal imager

Include:
Infrared Camera
AC power adapter
Lithium ion smart battery
USB cable
SD memory card
Fluke Connect™ wireless SD Card (where available, shipped separately in non-European countries)
Soft Transport Bag
Adjustable hand strap (left- or right-handed use),
Printed users’ manual in English, Spanish, French, German and Simplified Chinese, all other manuals on CD
SmartView software
Warranty Registration card
Powered by Create your own unique website with customizable templates.